Insulated Roll-Up Spiral Door ISO 50

The insulated roll up doors ISO 50 are the top of the range among the insulated shutters of Thermicroll.

These insulated doors guarantee the best performance in terms of speed, safety and insulation with an attractive appearance.

Spiral Door ISO50 is suitable to be applied indoors and outdoors for any type of industry. The circular spiral winding is in high density polyethylene. The mantle is made up of double-walled aluminum or steel panels.

The size of the winding is reduced. Finally, ISO50 insulated roll-up doors do not require anchoring to the ceiling.

Request a quote!

Insulated Roll-Up Spiral Door ISO 50

  • Safety of use by a 22-beam photocell barrier
  • Insulated panels, double sheet aluminium or painted galvanized steel clading
  • Window panels with perimeter frame in structural aluminum and transparent element in single wall polycarbonate
  • Single wall blind panels in structural aluminum
  • Airflow structural aluminum ventilation panels
  • High Insulating Power, with “U” value up to: ~ 1.5 W / m2 * K
  • Sliding on high density polyethylene guides (Thermicroll patent)
  • Absence of bulky ceiling fixings/hangers
  • Reduced lateral dimensions
  • Absence of winding shaft
  • Spiral wrapping of the elements, without contact and without wear
  • Lifting by double push-pull chain
  • Absence of springs subject to failure and brekage
  • Balancing by means of a group of counterweights
  • 400V three-phase motorization for intensive use
  • Controlled with inverter and absolute encoder
  • High opening speeds (up to 2m/s depending on door size)
  • Continuity of service
  • Captivating aesthetics
  • Durability up to 3 milion cycles (with periodic maintenance)

Spiral Door ISO 50 insulated roll-up doors: technical specifications

Among the most significant features of Spiral Door ISO 50 insulated shutters is the high-density polyethylene patented circular spiral winding. The cover of the damper is in double-walled aluminium or steel panels with high thermal-acoustic insulation and the possibility of inserting polycarbonate windows.

Extreme response speed, minimum displacement noise, absolute safety, upper winding with reduced overall dimensions, thanks to the special processing of the curved insulated profile make this product at the cutting edge of the industrial doors sector. In addition, no ceiling anchors are required for fixing the damper door saddle, unlike traditional quick-wound doors.

Ground impression is completely absent when the shutter is open. The last characteristic of the ISO 50 industrial shutter, but not for importance, is its very attractive aesthetics, able to provide the customer with an excellent business card of its activity. These and other innovations make Thermicroll® the leading company in design, research and development.

Thermicroll: Certified Spiral Industrial Doors

Thermicroll industrial doors make it possible to reduce costs, maintenance and assembly time, while at the same time enhancing quality and functionality. The industrial doors in the range use mechanical and electrical components of the highest quality, and are entirely developed, designed and built in Italy, in one of the company’s various facilities. Find out more about the advantages of industrial doors.

The most important guarantee on our insulated shutters is given by repeated tests on all industrial doors during the various phases before and after installation. In addition, all our insulated roller shutters comply with the 12453-12445/EC and UNI EN 13241-1/EC standards and are certified as exclusive and original products, unique in strength, practicality, functionality and quality.

If the ISO 50 insulated roll-up door is not the most suitable door for your needs, you can see the other insulated shutters by Thermicroll: Spiral 80 Special Application insulated shutters, Spiral 80 Cold Room insulated rapid doors, Air Flow shutters.
View the table with technical specifications and download the catalogue!

Thermicroll® Spiral Door ISO 50 Thermicroll® Spiral Door ISO 50

 THERMICROLL® SPIRAL DOOR ISO 50
TECHNICAL SPECIFICATIONS

PARAMETER SPECIFICATIONS
Applications Interna/External
Maximum dimensions (L x H) 6000 x 6500 mm
Maximum opening speed Up to 2 m/s (depending on size)
Maximum closing speed ~ 0,5 m/s
Thermal K ~ U = 1.5 W/m2K  (a seconda della dimensione)
Acoustics 22 Db/td>
Water permeability Class 3
Air permeability Class 3
Operating temperature -5 °C +40 °C
Wind Load
L/H 3000 x 3000 mm
L/H 5000 x 5000 mm
L/H 6000 x 6000 mm
Class:
4
3
3
Structure Galvanized steel or epoxy powder coated steel RAL (optional)
Coat Thickness 50mm Standard: RAL painted aluminium exterior / interior in standard colours.
Optional: Epoxy powder-coated steel/aluminium exterior/interior RAL
Spiral Patented in high density polyethylene
PEHD 500.000
Guides Patented in high density polyethylene
PEHD 500.000
Control panel 380 V inverter with microprocessor
Power supply 400 V
Frequency 50/60 Hz
Limit switch Encoder
Gearmotor Motorized asynchronous with 11 V electric brake for intensive high-frequency use
Emergency unlocking Standard: hand crank release (contrast weight)
Optional: manual chain release / UPS battery pack
Safety edge (EN 13241) Standard: integrated in photocell barriers
Optional: crushing sensor
Wiring IP 69 plug and play
Photocells 22 active beams up to 2500 mm
Durability 3 million opening and closing cycles with regular maintenance every 6 months or every 150,000 cycles

REQUEST A FREE QUOTE

    Full Name*
    Company*
    Phone Number*
    Email*
    Country:
    Model:
    Width mm.
    Height mm.
    Note

    *I agree to the Thermicroll privacy policy for the processing of data entered on this form.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service.

    All fields with (*) are required